150QJD4/6N Submersible pump for deep well
MYHOME FOVOL Pump Industry 150QJD4N/6N Multi-stage Flow of Water-Cooling Deep Well Submersible Pump Capacitor built-in High Lift 1.5"φ145mm 220/380V 1-3hp
Product Introduction of Multi-stage Deep Well Submersible Water Pump Capacitor 1.5 φ145mm 220/380V 1-3hp
150QJD is equipped with multi-stage submersible pump, water-cooling cooper movement, multi-stage durable centrifugal impeller and radial direction guide vane structure. Single mechanical seal and double mechanical seal from Italy are applied and O shape rubber sealing ring is applied at fixed spigot for static seal.
Product Features of Multi-stage Deep Well Submersible Water Pump Capacitor 1.5 φ145mm 220/380V 1-3hp:
Improved motor: higher power, water cooling motor, lower temperature rising, larger flow.
Improved impeller: 304 stainless steel impeller ensures long term operation of the pump.
Low water level operation is available if the water comes into the bottom section, minimum diving depth 112mm.
Integral 304 stainless steel housing
Stainless intensified pump cover(202)
Pump size5-7/810” (145mm) diameter
Engineering plastics nylon seat, effectively reduces friction of sand to impeller
304 stainless steel impeller
Cooper motor winding
Automatic lubricating motor bearing with longer service life
Internal over-temperature protection device
Insulation grade: F
The pump has applied multi-stage impeller structure with higher lift and wider range of application, which can be applied in long range water supply, breeding industry high efficient oxygenation, well drawing, mine water supply, agricultural irrigation, water tower supply and non-corrosive transmitting.
Highest liquid temperature no more than 40℃
Largest media particle no bigger than 0.02%
PH value of media shall be around 6.5-8.5.
Maximum diving depth 100 meter, no less than 5mm
Power source frequency 50Hz, single phase alternating current 220V, three phase alternating current 380V，voltage fluctuation ranges ±10% of rated value.