Floating Impeller Stainless Steel In/outlet 1.5/2,Deep Well Submersible Pump φ97mm 220/380V 1/2-3hp

Floating Impeller Stainless Steel In/outlet 1.5/2,Deep Well Submersible Pump φ97mm 220/380V 1/2-3hp

100QJD2/4/6 Self priming Submersible Pump for Deep Well(floating impeller) MYHOME FOVOL Pump Industry 100QJD2/3/4/6/8 Floating impeller Stainless Steel In/outlet 1.5"/2" Oil-Cooling Deep Well Submersible Pump High Lift φ97mm 220/380V 1/2-3hp Product Introduction 100QJD is equipped with...

Product Details

100QJD2/4/6  Self priming Submersible Pump for Deep Well(floating impeller)

MYHOME FOVOL Pump Industry 100QJD2/3/4/6/8 Floating impeller Stainless Steel In/outlet 1.5"/2" Oil-Cooling Deep Well Submersible Pump  High Lift φ97mm 220/380V 1/2-3hp


Product Introduction

100QJD is equipped with multi-stage submersible pump, oil-cooling cooper movement, multi-stage durable centrifugal impeller and radial direction guide vane structure. Single mechanical seal and O shape rubber sealing ring is applied at fixed spigot for static seal.


Product Features

Stainless steel cover, central spindle, coupling

High strength anti-friction plastic impeller and guide cover

larger flow, high lift, low well drilling cost, longer service life

Sand proof filtering check valve is applied at outlet port (national letter of patent)

Extension-type oil sac, adjust internal and external pressure of pump, dive deeper.

Low energy consumption, convenient maintenance 


Pump/Motor Configuration

Stainless steel laser welded inlet and outlet port

Internal sand proof filtering check valve

Multi-stage high intensity floating impeller structure

Stainless steel pump barrel, stainless hexagonal spindle with dismountable spline

Copper motor winding

Internal capacitance structure

Overheat protection device

Insulation level: F


Product Application 

The pump has applied multi-stage impeller structure with higher lift and wider range of application, which can be applied in long range water supply, garden sprinkling irrigation, well drawing, water tower supply, agricultural irrigation and other fields. 


Operation Condition

The pump can be continuously functional under the conditions below

Highest liquid temperature no more than 40℃

Largest media particle no bigger than 0.02%

PH value of media shall be around 6.5-8.5.

Maximum diving depth 100 meter, no less than 5mm

Power source frequency 50Hz, single phase alternating voltage 220V, tri-phase alternating voltage 380V, voltage fluctuation ranges ±10% of rated value. 

Floating Impeller Stainless Steel.jpg

1. Outlet port  2. Inner angle screw 3. Locating part 4. Seal ring 5. Vane plate 6. Impeller 7. Pump cover
8. Pump barrel 9. Coupling 10. Hexagon nut 11. Hexagon bolt 12. Inlet port 13. Mechanic sealing
14. Seal ring 15. Immersion paint coil 16. Barrel 17. Bearing 18. Capacitance 19. Leather cup 20. Bottom cover 21. Jump ring 22. Lower bearing seat 23. Rotator spindle 24. Countersunk screw 25. Pin 26. Framework oil sealing 27. Oil sealing cover 28. PTFE gasket 29. Adjusting gasket 30. Sand proof cover
31. Cable connected pressing plate 32. Upper cable pressing plate 33. Cable pressing plate 34. Pump spindle 35. Washer 36. Ceramic bushing 37. Washer 38. Hexagon screw 39. Capacitance clip


Model Instruction


Technical Parameters





Related Products

Inquiry