Injection Jet Well Pump with Smart Chip Control Pressure Switch 1X1 230V 1/2-3/2hp

Injection Jet Well Pump with Smart Chip Control Pressure Switch 1X1 230V 1/2-3/2hp

JET-YA Intelligent Automatic Injection Pump YANGCHUN Pump Industry JET-YA Intelligent Automatic Injection Pump With Smart Chip Control Pressure Switch 1"X1" 230V 1/2-3/2hp Product Introduction of the jet pumps for sale: JET-YA is a new intelligent automatic household electric pump with...

Product Details

Injection Jet Well Pump With Smart Chip Control Pressure Switch 1X1 230V 1/2-3/2hp

JET-YA Intelligent Automatic Injection Pump

YANGCHUN Pump Industry JET-YA Intelligent Automatic Injection Pump With Smart Chip Control Pressure Switch 1"X1" 230V 1/2-3/2hp


Product Introduction of the jet pumps for sale:

JET-YA is a new intelligent automatic household electric pump with high efficiency and low energy consumption. It is formed by horizontal type centrifugal pump, injection pipe, sealing, motor and intelligent PLC control system. The motor is single/tri-phase asynchronous with strong suction and stable operation.  


Product Features of the jet well pump:

Innovation and Upgrading

PC intelligent chip controlling inching pressure switch, silent control avoids frequent switch trip.

Long service life

Automatic anhydrous power-off: power of the pump will be automatically cut off when the inlet pipe operates for 6 minutes without water inside. Tap water pipe low pressure water shortage protection, automatic protection program activation avoids damage on mechanic sealing under long term operation. 1, 2, 24, start water pump, inspect whether there is enough water inside. If there is no water inside, move to next program until the power is cut off.

Flow control: when the water outlet flow is low, electronic control system will automatically inspect and switch the low flow control in order to ensure normal operation of the pump, pressure control system provides longer service life.

Pump blocking protection: if the pump hasn’t been used for a long period of time, the pump will be compulsorily started and clear the impurity for 10 seconds every 48 hours to prevent the pump from being blocked. 

Delay start: the pump will start after the power is connected for 2 seconds to protect the motor and operator.

Delay shutdown: the pump will be shut down after the valve is closed for 5 seconds to ensure normal water supply.

Overload protection: the motor is equipped with inner overheat protection device to prevent the motor burning under abnormal conditions.


Pump/Motor Configuration

Electrophoresis anti-rust processed cast iron pump head and connection

304 stainless steel laser welded impeller, copper impeller and aluminum impeller available

304 stainless steel welded spindle

Stainless pump barrel

C&U bearing

Copper motor winding

Single phase with inner overheat protection device

Protection level: IPX4


Product Application of the 1 hp jet pump:

The pump is an ideal household water pump with high efficiency and low energy consumption. It can be widely applied for family water supply, well water drawing, tap water pipe pressure charging, garden irrigation, and especially for pressure charging on solar energy pipe of water heater with low water pressure in order to avoid unstable temperature of the water supplied.


Operation Condition of the centrifugal booster pump:

The pump can be continuously functional under the conditions below

Transmission medium shall be pure water and the temperature shall be within 0~100℃.

PH value of media shall be around 6.5-8.5.

Maximum solid impurity size no more than 0.1%, particle size no more than 0.2mm.

Power source frequency 50Hz, single phase alternating voltage 220V, voltage fluctuation ranges ±10% of rated value.  

When environment temperature is below 0℃, low temperature protection shall be applied. Drainage screw at bottom of the pump shall be loosen and the water inside the pump shall be drained in order to prevent the pump body from being frost-cracked when the pump is not working (automatic type shall ensure that there is no water leakage on pipes).


Model Instruction

YANGCHUN Variable Frequency Constant Pressure Injection Pump With Pressure Switch.jpg


FAQ:

1. Are you a factory or trading company?

 We are a factory.

2. Is OEM available?

 Yes,OEM is available.We have professional designer to help your brand promotion.

3. Is the sample availbale?

 Yes, samples are available to test the quality. You need to pay the sample fee and freight

4. Whta’s your usual payment term for orders?

 We accept T/T、L/C

5. What’s the warranty of your products?

 Usually we guarantee1 year after delivery date.


Technical Parameters

pump application1(001).jpg


yangchun pump  factory view2.jpg


yangchun pump exhibition3(001).jpg


yangchun pump package and shipping4.jpg


Related Products

Inquiry