JET-S Stainless Injection Self-priming Pump
YANGCHUN Pump Industry JET-S Stainless Steel JET Self-Priming Pump With Centrifugal Impeller 220/380V,1/2-3/2hp
JET stainless injection self-priming pump (called as pump below for short), applies centrifugal impeller, sound insulation guide vane, injector and other parts. Through the injector by pressure, vacuum is formed. The vacuum sucks the liquid at low level into the inlet port of the pump. Then the liquid is pumped out by the centrifugal force of impeller. The motor is single/tri-phase asynchronous with strong suction and stable operation.
Compact and portable, tight structure, large flow, large size particle passing available
High temperature resistant parts can stay non-deformed under high temperature (60 degrees) for long term operation.
Motor can be modified as automatic type for long term and frequent operation.
Higher pressure and lift than other self-priming pumps under same power.
304 stainless steel pump body and pump cover
High temperature resistant PPO guide vane and injector
304 stainless steel rotator spindle
Copper motor winding
Single phase motor with inner overheat protection device.
Protection level: IPX4
The pump can be applied for the transmission of water or similar liquid. It can be used for drawing well water, industrial cleaning, family water supply, automatic irrigation system, small size air conditioning system and other facilities.
The pump can be continuously functional under the conditions below
Media temperature no more than ＋60℃.
PH value of media shall be around 6.5-8.5.
Maximum solid impurity size no more than 0.1%, particle size no more than 0.2mm.
Power source frequency 50Hz, single phase alternating voltage 220V, tri-phase alternating voltage 380V, voltage fluctuation ranges ±10% of rated value.