Product Details
QDXMini-type Submersible pump
YANGCHUN Pump Industry QDX Minitype Cast Iron & aluminium body ABS Base Diving Pump Rural underground,220V 1/2hp-2hp
Product Introduction
QDX stainless submersible pump (called as pump for short), is combined by water pump, motor and seal. The pump is equipped with heat protection device. The one phase or three phase motor is located in the upper section of the pump. The water pump is equipped with centrifugal impeller and volute structure, locating below the motor. Double mechanical seal is applied between the motor and pump and O shape rubber sealing ring is applied at fixed spigot for static seal.
Product Features
Small size, low weight, less area occupation, easier assembly
Water pump directly connects with motor, tight structure, easy for carrying.
Good looking design, large flow, high lift
Engineering plastics mask equipped with nylon seat, higher friction, and vibration and corrosion resistance.
Pump/Motor Configuration
Rust prevention processed cast iron body
C&U high efficiency bearing
Aluminum/plastic impellor available
cooper wire winding
304 stainless fabricated axle
Internal heat protection area
Cast aluminum cooper, cast aluminum upper cap
Insulation grade:
Protection level: Ip68
Product Application
The pump can be widely applied in well drawing, farm irrigation, family water supply, oxygenation water supply and drainage, farmland remote water supply, garden irrigation in countryside and water supply for hotel, canteen and high-rise building.
Operation Condition
Media temperature no more than +60℃.
PH value of media shall be around 5-8.5.
Size of solid impurity no less than 0.1%, particle no bigger than 0.2mm.
Power source frequency 50Hz, single phase alternating current 220V, three phase alternating current 380V, voltage fluctuation ranges ±10% of rated value.
Diving dept no more than 5m.
Model Instruction
Technical Parameters
Inquiry