WQ-AS Sewage submersible Pump (with tungsten steel cutting disc)
YANGCHUN Pump Industry WQ-AS Stainless Steel Cutting Sewage Submersible Electric pump，construction site 220/380V,3/2hp
WQ-AS submersible pump (called as pump for short), is combined by water pump, motor and seal. The pump is equipped with heat protection device. The one phase or three phase motor is located in the upper section of the pump. The water pump is equipped with centrifugal impeller and volute structure, locating below the motor. Double mechanical seal is applied between the motor and pump and O shape rubber sealing ring is applied at fixed spigot for static seal.
High lift, good looking design, long service life
Strong cutting disc can effectively cut or slice impurities and ensure smooth flow
Centrifugal volute structure, large flow channel, strong pollution discharge capability
Rust prevention processed cast iron body
C&U high efficiency bearing
Cast iron impellor available
Motor barrel winding
304 stainless fabricated axle
Internal heat protection area
202 stainless barrel, 304 Stainless upper cap
Insulation grade: B
Tungsten steel cutting disc
Protection level: Ip68
The pump can be widely applied in sewage drainage of construction site, coal mine, metallurgy, printing and dyeing and textile and clear water irrigation and drainage. Cutting type pump with advanced technology and special cutting disc design can cut or slice fiber, gloves and plastic bags and ensure smooth flow.
Media temperature no more than ＋60℃.
PH value of media shall be around 5-8.5.
Maximum input media density 1.2×103kg/m³
Power source frequency 50Hz, three phase alternating current 380V, voltage fluctuation ranges ±10% of rated value.
Diving dept no more than 5m.